Bruce and Bill
Thanks indeed for all suggestions. I downloaded Commander and had no problem getting it work with
WSJT-X. However it seems that I still have the same problem so it probably my settings…
Bill. When running WSJT-X and pressing TUNE I dont have Power if rig is set to RTTY but if rig is set to RTTY-R
(or AM) I have power output.
It’s mothers day today and our two sons with familes comming and staying for dinner so I have to leave this until
tomorrow. (All of us have got full Pfizer jabs.)
73 Lars. (Note! I’m running a remote station. 6 hours drive one way.)
Skickades från E-post för Windows 10
if you are getting power in RTTY modes then I doubt you have a working Tx audio connection, that is probably just the rig keying one of the RTTY tones.
Check you rig is correctly configured and connected to take audio from your sound card on Tx when in USB-DATA mode. E.g. DATA MOD -> USB if you are using a USB connection to your PC and rig.
Also check your Tx audio levels: https://wsjtx.groups.io/g/main/message/13890
On 29/05/2021 16:36, Lars Berg wrote: