locked Re: #bugreport ALL.TXT #IssueReport


Sam Birnbaum
 

I has not been this way for a long time. It was a bug that was corrected but seems to be still in the version that bill is using.
I was running the Windows version and it was corrected in a later RC release. 
If appending the date and time slows the process on your PC, then you have a problem with your hardware.

73, 

Sam W2JDB



-----Original Message-----
From: Dave Garber <ve3wej@...>
To: WSJT-x group <main@wsjtx.groups.io>
Sent: Mon, Apr 19, 2021 7:17 pm
Subject: Re: [WSJTX] #bugreport ALL.TXT

this has been this way for quite a while, I would have to look at release notes.  but sounds normal.  if the date does not change why append with it and slow the process..

Dave Garber
VE3WEJ / VE3IE


On Mon, Apr 19, 2021 at 5:47 PM Bill Lederer <w8lvn.9@...> wrote:
This issue still exists for Rc4, but apparently only for MSK144.


Looks fine for FT8, but not MSK144

210419_070415     1.840 Tx FT8      0  0.0 1612 CQ W8LVN EN62
210419_070445     1.840 Tx FT8      0  0.0 1612 CQ W8LVN EN62
210419_070515     1.840 Tx FT8      0  0.0 1612 CQ W8LVN EN62
50.260 Rx MSK144  -6  7.0 1440 VE9GJ K2DRH EN41
50.260 Rx MSK144  -5 11.3 1440 VE9GJ K2DRH EN41
50.260 Rx MSK144  -6  9.8 1440 VE9GJ K2DRH EN41
50.260 Rx MSK144  -5 13.7 1440 VE9GJ K2DRH EN41
50.260 Rx MSK144  -2  1.1 1440 VE9GJ K2DRH EN41
50.260 Rx MSK144  -1  2.5 1440 VE9GJ K2DRH EN41
50.260 Rx MSK144  -2  0.7 1440 VE9GJ K2DRH EN41
50.260 Rx MSK144  -7 13.3 1440 VE9GJ K2DRH RRR
50.260 Rx MSK144  -1 26.4 1475 N0AN K1RZ +02
50.260 Rx MSK144   0 23.0 1472 N0AN N1KWF FN32
50.260 Rx MSK144  -1 22.6 1460 N0AN N1KWF FN32
50.260 Rx MSK144   1 28.9 1464 N0AN N1KWF FN32
50.260 Rx MSK144  -8 28.6 1443 Z4VUR/R RH0BDY/R R DH26
50.260 Rx MSK144   8 22.6 1462 VE4CY W9DR EM78
50.260 Rx MSK144  11 22.9 1462 VE4CY W9DR EM78
50.260 Rx MSK144  12 27.0 1462 VE4CY W9DR EM78
50.260 Rx MSK144  15 27.3 1460 VE4CY W9DR EM78
50.260 Rx MSK144  13 15.5 1460 VE4CY W9DR EM78
50.260 Rx MSK144  14 26.1 1462 VE4CY W9DR EM78
50.260 Rx MSK144   3 16.0 1462 VE4CY W9DR EM78
50.260 Rx MSK144   4 16.0 1463 VE4CY W9DR EM78
50.260 Rx MSK144   6 16.6 1461 VE4CY W9DR EM78
50.260 Rx MSK144   7 16.7 1461 VE4CY W9DR EM78
50.260 Rx MSK144  13 18.4 1463 VE4CY W9DR EM78
50.260 Rx MSK144  14 18.4 1463 VE4CY W9DR EM78
50.260 Rx MSK144  -3 15.5 1463 VE4CY W9DR EM78
50.260 Rx MSK144   5 20.8 1462 VE4CY W9DR RRR
50.260 Rx MSK144   6 29.2 1462 VE4CY W9DR RRR
50.260 Rx MSK144   7 29.3 1460 VE4CY W9DR RRR
210419_140330    18.100 Rx FT8     -6  0.2  780 N5HHS N3GX R+05
210419_140330    18.100 Rx FT8    -11  0.2 1591 KB2M KI4KDR EM45
210419_140330    18.100 Rx FT8    -12  0.1 1261 CQ N3NVA FN20
210419_140400    10.136 Rx FT8     14  0.1 1328 CQ VA3MJR FN03
210419_140400    10.136 Rx FT8      1  0.1  607 KG0TR VE3RXO R-13

Thanks,
w8lvn


On Mon, Apr 19, 2021 at 10:59 AM Bill Lederer via groups.io <w8lvn.9=gmail.com@groups.io> wrote:
Well, my issue was in the RC3 release.  I'm now running with RC4, and will see if it iis still there.

w8lvn

On Mon, Apr 19, 2021 at 6:41 AM Sam Birnbaum via groups.io <w2jdb=aol.com@groups.io> wrote:
Hi Bill,

I ran into this problem when I tested some function in my Alltext.exe program that I sued for the same function.
I found that when I used WSJT-X  2.3 rc1 (or rc2).  The Date and time was only included in the TX record that
was written to the All.txt file.

I believe the problem was fixed when 2.3 rc3 was released.

73,  

Sam W2JDB



-----Original Message-----
From: Bill Lederer <w8lvn.9@...>
To: WSJTX@groups.io
Sent: Sun, Apr 18, 2021 9:54 pm
Subject: [WSJTX] #bugreport ALL.TXT

Team:

I am noticing that under some conditions, the date field is omitted from ALL.TXT for monitored calls, but not for transmissions I make.

What is a little more odd, this did happen when switching from 160 meter FT8 to 6 meter MSK144.

Is this a known issue?

I have just downloaded and installed the rc4 version in case the issue is resolved.

(I use the ALL.TXT file to recreate QSOs that don't get properly logged due to an xquartz crash. Usually I run WSJTX on Intel NUCs running Ubuntu after doing "ssh -Y <linux-host>" and xterm. Works most of the time, but xquartz on mac has proven to be unexpectedly crash-worthy.)

--w8lvn--

--
--w8lvn--








--
--w8lvn--





--
--w8lvn--






Join main@WSJTX.groups.io to automatically receive all group messages.