locked WSJT-X Crashing on transmit #wsjt-x-crashing


Panther 353PA
 

I am running WSJT-X on a Raspberry Pi 400. This error occurs on both 2.3.1 and 2.40.-rc4 versions with Hamlib 4.1 installed. I am using a USB data cable with a ferrite and about 5 turns through it and an IC-705. I use the same cable on my Macbook without issue. Less than five seconds into transmit the application crashes with no message and the radio is stuck in transmit mode. From the WSJT-X log I found the following;

[SYSLOG][2021-04-13 02:14:17.304476][00:00:11.327444][error] handle_transceiver_failure: reason: Hamlib error: Command rejected by the rig
rig.c(1488):set_cache_freq return(0)
rig_set_vfo: return -9, vfo=VFOB
rig.c(2516):rig_set_vfo return(-9) while exchanging VFOs
[RIGCTRL][2021-04-13 02:14:17.305876][00:00:11.328842][error] error: Command rejected by the rig
frame.c(355):icom_transaction return(-9)
icom.c(3661):icom_set_ptt return(-9)
rig.c(2650):rig_set_ptt return(-9)
[SYSLOG][2021-04-13 02:14:29.470977][00:00:23.493949][warning] Detected dropped audio source samples: 2,064 (0.043 S)
[SYSLOG][2021-04-13 02:14:43.297421][00:00:37.320392][info] Log Finish
I am stumped. Thoughts?

Join main@WSJTX.groups.io to automatically receive all group messages.