Good to hear there is no problem in WSJT.
However, my problem is WSJT specific.
All other applications work OK with the same WIN10
- where and in what files do I find the specific WSJT audio
I presume I have to dig into those to get my problem resolved.
On 23/02/2021 09:54, Henk PA0C wrote:
> It is not possible to choose Left or Right audio
channel in 2.3.0. and
> 2.4.0 rc1.
> Both audio channels have the same content.
> Using USB audio input.
> Other applications have no difficulty using the same
> microphone input.
> They see a clear difference between L and R input
(and can select one)
> Mic. is set fot 2 channel, 16 bit, 48000 Hz. (but
other 2 channel
> settings make no difference)
> Did try other USB ports of the PC.
> I deleted all WSJT instances, cleaned the register,
removed all USB
> audio ports (hidden and shown), restarted several
> Did a new install on a separate laptop.
> All with no result.
I have just double-checked this using a tone generated by
played by through VAC to WSJT-X. I can select left channel
"Settings->Audio" and swing the playback balance in
Audacity from left
to right and see the level at maximum in WSJT-X when the
fully left, and minimum level (silence) when the balance
is fully right.
Conversely when I select the right channel for input in
"Settings->Audio" I see maximum and minimum levels in
balance right and left respectively.
Stereo input channel selection is definitely working in
something is wrong with your setup if you are not getting