locked Re: WSJT-X v2.2.2 and Xiegu G90
toggle quoted messageShow quoted text
My 2 cents worth . . .
What software are you using for rig control. For example, I use Ham Radio Deluxe with my Yaesu FTdx3000.
(But, of course, HRD does not support the Xiegu.)
The first place I would look is the rig control software.
Sent from my T-Mobile 5G Device
I just purchased a Xiegu G90 and got it working in FT8/FT4 with WSJT-X. In WSJT-X I see other stations calling CQ and I can make connections with other stations. According to the other stations my signal strength is MUCH lower than theirs. If I see someone calling CQ at +8dB when they reply they say my signal is something like -19dB. At first I thought it was just due to the G90 having 20Watts max output. However I just noticed that the mode is USB when receiving, but the G90 switches to LSB when transmitting. I do not see this behavior with my Icom IC-7300. I'm wondering if this is why my signal reports are so low.
-------- Original message --------
From: Steven Reich <wi9ssr@...>
Date: 1/3/21 3:45 AM (GMT-05:00)
Subject: [WSJTX] WSJT-X v2.2.2 and Xiegu G90
Is this normal for the G90, or do I have something setup wrong in WSJT-X, or possibly with the G90?
Thanks, Steve WI9SSR