On Nov 22, 2020, at 10:47, Tom Crites <crites57@...> wrote:
I guess my question is with a FlexRadio Systems FLEX-6300 should I just leave the Split Operation set to None and just set my transmit frequency to a clear area with Shift-Left Click?
Tom,
If 'Fake it' is working use it. The User Guide in 4.2. Radio recommends: Either method will result in a cleaner transmitted signal, by keeping the Tx audio always in the range 1500 to 2000 Hz so that audio harmonics cannot pass through the Tx sideband filter.
Without split mode you need to be very careful not to overdrive any transmission path audio related element for whatever reason, when operating below 1000 Hz audio frequency.
