Locked Re: "Dimension 4"
|
IF THIS IS TRUE (I DOUBT IT) THEN IT IS CRAZY THAT THE PROGRAM DOES NOT HAVE A SETTING METHOD THAT HOLDS ACROSS REBOOTS. No problem with Nettime like that.
Outlook Laptop Gil W0MN Hierro candente, batir de repente 44.08226N 92.51265W EN34rb
From: main@WSJTX.groups.io <main@WSJTX.groups.io> On Behalf Of Tom V. Segalstad
Sent: Monday, October 26, 2020 06:18 To: main@WSJTX.groups.io Subject: [WSJTX] "Dimension 4"
On May 22 this year I contributed this to the Group about the PC clock setting program «Dimension 4»:
In Dimension 4 you MUST open (run) the program, choose «Settings», and answer «yes», to let the program make time changes in your PC.
If not, Dimension 4 will not adjust your PC time clock. This procedure has to be done every time the PC is started or restarted – else it may not adjust your PC clock.
Then check if the time is within +/- 1 second of correct time by RELOADING for instance www.time.is
If the PC time is not good enough, right click the Dimension 4 icon on the PC’s lower right command line, and select «Syncronize now». After some seconds (at least some 10 seconds on my PC), RELOAD www.time.is again, and check if the PC’s clock has changed to an acceptable time. If still not good, repeat this procedure, until the PC clock’s time is acceptable.
I have used Dimension 4 this way for many years, without problems.
73 from Tom (LA4LN)
Fra: Gary - AG0N
-- W0MN EN34rb 44.08226 N 92.51265 W Hierro candente, batir de repente HP Laptop |
|
|