toggle quoted messageShow quoted text
For Dave, AD4TJ: The 80m WSPR freq changed months and months ago. To keep abreast of current WSPR happenings, please see http://www.wsprnet.org
. The current 80m WSPR freq is 3.5686. Occasionally I still see a station on the old 80m WSPR freq, however they find themselves all alone due to not staying informed.
On Oct 23, 2020, at 09:45, "David AD4TJ via groups.io
Bill, there was an email sent out last night that reported that FST4 was using WSPR frequencies on 40 meters, but that the audio frequency of 2000 hz was used, which should mean that it would not interfere with WSPR stations. Is that incorrect info?
On Friday, October 23, 2020, 9:36:19 AM EDT, Bill Somerville <g4wjs@...> wrote:
a QSO mode like FST4 should not be used
in WSPR sub-bands, the only exception to this might be on LF and
MF bands where often transmitters have very limited bandwidths, or
even fixed single frequency. Note here MF means 630m and LF means
2200m. Where transmitters and receivers can be readily tuned to
different frequencies then please do not use WSPR sub-bands for
other modes, the WSPR network is extensive and often using
specialist hardware in unattended operation with quite low QRP or
QRPP power levels, it provides an excellent propagation probing
and research tool.
FST4 and FST4W are targeted at MF/LF
bands where the path frequency stability is likely to be suitable
for the close tone spacings used with the longer T/R periods, at
HF frequencies Doppler spreading and transmitted stability is less
likely to favour FST4 over modes like JT9 and similarly FST4W vs.
Please experiment with these modes and
report back how it goes, but QRM to other modes must be considered
and avoided where possible.
On 23/10/2020 14:22, David AD4TJ via
Wilfredo: I did a search for
" WSPR Frequencies " and wrote them down. Apparently, FST4 is
being done on WSPR frequencies, although I listened last night
to 7.0386 MHz and only saw WSPR signals; no FST4 seen. Nor on
the alternate freq of 7.04 MHz. Then I went to 80 meters, to
WSPR frequency of 3.5926 MHz, then 3.594 MHz, and, again, saw
no FST4 signals. So I am at a loss, also, as to where the
On Friday, October 23, 2020, 8:43:59 AM EDT, Wilfredo
Martínez Consuegra (CO6WIL) <co6wil@...>
As far as I could understand in the mail, I tried to
do what I show in the image I send you, and I didn't
get any results.
Is there anything else I should do?
Wilfredo from Cuba