locked Re: Vertical spikes every 1000 hz prevent decoding


Joe WB9SBD
 

myself I would not even worry about them, They are taking up less than 1% of the band, not hurting anything at all.

Joe WB9SBD

The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com

On 10/9/2020 5:06 PM, Joe KN5Y via groups.io wrote:
Wondering where the spikes come from? How to remove them?
They are high amplitude and periodic (every 1000 Hz)

Regards,
Joe KN5Y 

On Oct 9, 2020, at 16:54, JP Tucson, AZ <samcat88az@...> wrote:


I agree, no signals to decode.

But at some point it decoded something; as you have a callsign & distance below the frequency.

Do you have an antenna switch? Maybe set to the ground position?
Bad coax?
Acts like no antenna is connected.

73 - John - N7GHZ

On Fri, Oct 9, 2020, 2:22 PM Joe KN5Y via groups.io <joekellis=verizon.net@groups.io> wrote:
Seen in v2.2.2.
Windows 10/Yaesu FT-991A
loaded USB drivers and can Rx/Tx

No decoding because of strength of vertical spikes every 1000 hz.
Don't hear spikes.j
<spikes_wsjt-x.PNG>
ust present in the display









Join main@WSJTX.groups.io to automatically receive all group messages.