Locked Re: The dreaded no Transmit
|
Frank Donovan
I should have said "to improve audio signal level above 2.5 kHz" From: "Frank Donovan" <donovanf@...> To: main@WSJTX.groups.io Sent: Wednesday, June 10, 2020 5:18:29 AM Subject: Re: [WSJTX] The dreaded no Transmit Hi Wayne,
I also use USB mode on my K3 so I can use the equalizer to improve receiver sensitivity above 2.5 kHz Compression is set to zero 73 Frank W3LPL From: "Wayne Newport" <wazzan1@...> To: main@WSJTX.groups.io Sent: Wednesday, June 10, 2020 5:14:34 AM Subject: Re: [WSJTX] The dreaded no Transmit hi Bill, The only reason I'm not using Data USB on the TS590s is simply because I have always just used USB mode. Its always worked fine . If you are going to customise audio equalisation then possibly it would be better to use Data USB and have the seperate settings . I am changing radios shortly to an FTDX3000 (the TS590s has an intermittent problem}. And it is much better to use USB rather than Data on that radio thanks again for your help Wayne VK4WTN |
|
|